Fibre Networking (365 products)

125GBASE-SR SFP28 850nm MMF 100m LC. Fully compatible with Juniper...

Compatible with Juniper JNP-SFP-25G-SR More Info

25GBASE-LR SFP28 1310nm SMF 10km LC . Fully compatible with Cisco Systems...

Compatible with Cisco Systems SFP-25G-LR-S More Info

10/100Mbps Multi-Mode Media Converter

- Complies with 802.3u 10/100Base-TX, 100Base-FX standards.- Provides switch configuration of Half-Duplex / Full-Duplex transfer mode for FX port.- Extends fiber distance up to 2kmThe MC100CM is a media converter designed to convert 100BASE-FX fiber to 100Base-TX copper media or vice versa. Designed under IEEE 802.3u 10/100Base-TX and 100Base-FX standards, the MC100CM is designed for use with multi-mode fiber cable utilizing the SC-Type connector. The MC100CM supports shortwave (SX) laser specification at a full wire speed forwarding rate.... More Info

10/100Mbps Single-Mode Media Converter

- Complies with 802.3u 10/100Base-TX, 100Base-FX standards.- Provides switch configuration of Half-Duplex / Full-Duplex transfer mode for FX port.- Extends fiber distance up to 20－60kmThe MC110CS is a media converter designed to convert 100BASE-FX fiber to 100Base-TX copper media or vice versa. Designed under IEEE 802.3u 10/100Base-TX and 100Base-FX standards, the MC110CS is designed for use with single-mode fiber cable utilizing the SC-Type connector. The MC110CS supports shortwave (SX) laser specification at a full wire speed forwarding... More Info

10/100Mbps WDM Media Converter

- Complies with 802.3u 10/100Base-TX, 100Base-FX standards- Adopts WDM technology, transmitting and receiving data on one single fiberThe MC111CS is a media converter designed to convert 100BASE-FX fiber to 100Base-TX copper media or vice versa. Adopting WDM technology, MC111CS takes only one fiber cable to transmit and receive data, which will save half cabling cost for you. Designed under IEEE 802.3u 10/100Base-TX and 100Base-FX standards, the MC111CS is designed for use with single-mode fiber cable utilizing the SC-Type connector. The... More Info

10/100Mbps WDM Media Converter

- Complies with 802.3u 10/100Base-TX, 100Base-FX standards.- Adopts WDM technology, transmitting and receiving data on one single fiber. The MC112CS is a media converter designed to convert 100BASE-FX fiber to 100Base-TX copper media or vice versa. Adopting WDM technology, MC112CS takes only one fiber cable to transmit and receive data, which will save half cabling cost for you. Designed under IEEE 802.3u 10/100Base-TX and 100Base-FX standards, the MC112CS is designed for use with single-mode fiber cable utilizing the SC-Type connector. The... More Info

Gigabit Multi-Mode Media Converter

- Complies with IEEE 802.3ab and IEEE 802.3z- Provides switch configuration of Force /Auto transfer mode for FX port.- Extends fiber distance up to 0.5kmThe MC200CM is a media converter designed to convert 1000BASE-SX fiber to 1000Base-T copper media or vice versa. Designed under IEEE802.3ab 1000Base-T and IEEE802.3z 1000Base-SX standards, the MC200CM is designed for use with multi-mode fiber cable utilizing the SC-Type connector. The MC200CM supports shortwave (SX) laser specification at a full wire speed forwarding rate. It works at 850nm... More Info

Gigabit Single-Mode Media Converter

- Complies with IEEE 802.3ab and IEEE 802.3z- Provides switch configuration of Force /Auto transfer mode for FX port.- Extends fiber distance up to 15kmThe MC210CS is a media converter designed to convert 1000BASE-LX/LH fiber to 1000Base-T copper media or vice versa. Designed under IEEE802.3ab 1000Base-T and IEEE802.3z 1000Base-LX/LH standards, the MC210CS is designed for use with single-mode fiber cable utilizing the SC-Type connector. The MC210CS supports shortwave (SX) laser specification at a full wire speed forwarding rate. It works at... More Info

40GBASE-SR4 QSFP+ 850nm MMF 150m MTP. Fully compatible with Avaya AA1404005-E6

Compatible with Avaya AA1404005-E6Form Type: QSFP+Data Rate: 40G 41.25GbpsWavelength: 850nmDistance: 150mConnector: MPOFiber Type: MMFOperating Temperature: 0~70 CDOM Supported: Yes More Info

Gigabit SFP Media Converter

- Complies with IEEE 802.3ab and IEEE 802.3z- FX port supports hot-swappable- Extends fiber distance up to 0.55km for multi-mode fiber and 10km for single-mode fiberThe MC220L is a media converter designed to convert 1000BASE-SX/LX/LH fiber to 1000Base-T copper media or vice versa. Designed under IEEE802.3ab 1000Base-T and IEEE802.3z 1000Base-SX/LX/LH standards, the MC220L is designed for use with multi-mode/single-mode fiber cable utilizing the SC-Type connector. The MC220L supports shortwave (SX) laser specification at a full wire speed... More Info

MiniGBIC, 850nm, Multi-mode Fiber, 1.25Gbps, LC/UPC

The TL-SM311 series Fiber Module Cards are introduced for extending transfer distance. Attached to our managed/smart switches, they can extend the distance to several kilometers even tens of kilometers which can basically satisfy the distance requirement of LAN. Users can choose whether and which items to use the fiber modules according to the demand in order to lower cost. More Info

40GBASE-LR4 QSFP+ 1310nm SMF 10km LC . Fully compatible with Avaya AA1404001-E6

Compatible with Avaya AA1404001-E6Form Type: QSFP+Data Rate: 40G 41.25GbpsWavelength: 1310nmDistance: 10kmConnector: Dual LCFiber Type: SMFOperating Temperature: 0~70 CDOM Supported: Yes More Info

More Info

TL-SM321B - 1000Base-BX WDM Bi-Directional SFP Module

Spotlight:- WDM Bi-Directional SFP Module- Supports WDM Bi-Directional technology, using a single strand of fiber, cost savingTP-LINK´s TL-SM321B adopts the latest standard 1000Base-BX, transmission over a single strand of fiber, with one different wavelength going in each direction. You can extend the network distance up to 10Km with TP-LINK´s Routers, Switches, Media Converters to provide high speed and stability.Features- Supports WDM Bi-Directional technology, using a single strand of fiber- TX: 1310nm / RX: 1550nm- Internal +3.3V Power... More Info

Multi-core Fibre Cable, Available in all Fibre Sizes, from 4 Core to 24 Core

The Starlight™ Multi-purpose Uni-loose Tube Distribution Fibre Cable provides a cost effective solution to all internal or external fibre cabling requirements, particularly where on-site fusion splicing of pigtails is the preferred termination technique. The cable consists of a single central uni-tube containing individually colour coded 250μm buffered fibres. This tube is embedded in an E-glass roving, and oversheathed with a single Low Smoke Zero Halogen (LSZH) outer jacket. The jacket is flame retardant, UV stabilised and extremely... More Info

SC Loaded Fibre Patch Panel with Splice Management

This Starlight™ SC Fibre Patch Panel is available with a range of port densities. The fibre patch panels are manufactured from mild steel and finished in a black powder coating. They are suitable for mounting in 19" cabinets. The panels feature fully adjustable mounting brackets, numbered adaptor ports and a range of panel knock-outs to suit common gland sizes. The panels include a sliding tray for easy access to splices. Fibre Panels are supplied fully loaded and complete with splice management. Unloaded versions and other connect or... More Info