Fibre Networking (365 products)

1000BASE-LX SFP 1310nm SMF 10km LC. Fully compatible with Alcatel SFP-GIG-LX

Compatible with Alcatel SFP-GIG-LXForm Type: SFPData Rate: 1000BASE 1.25GbpsWavelength: 1310nmDistance: 10kmConnector: Dual LCFiber Type: SMFOperating Temperature: 0~70 CDOM Supported: Yes More Info

Fibre Patch lead terminated with ST connectors at both ends available up to 10m

Our singlemode fibre patch leads are manufactured in-house, are 100% tested and certified and surpass the high standards required for datacomms and CATV applications. The leads are manufactured in our advanced fibre termination facility under stringently controlled quality conditions. Our termination facility is one of the largest in the UK providing a high volume and fast turnaround service for any length singlemode lead. If you require a length that is not shown, email in and we can send over a quote. ST-ST Fibre Lead Details Features:... More Info

ProSafe 100Base-FX SFP LC GBIC

- Adds Fast Ethernet fiber connectivity to fully Managed Switches- Fits into standard SFP slots- Drives Fast Ethernet up to 2 km distances with multimode fiber- Fast Ethernet multimode fiber connectivity (IEEE 802.3-2002)- LC duplex connector- Fits into standard SFP interfaces of fully Managed Switches- FSM726, GSM72xx, GSM72xxPS, GSM73xxS, GSM7328FS- Drives Fast Ethernet up to 2 km distances with legacy 62.5/125μm OM1 multimode fiber cables- Drives Fast Ethernet up to 2 km distances with 50/125μm laser-optimized OM3 multimode fiber cables More Info

1000BASE-T SFP RJ45 100m Cu. Fully compatible with Alcatel SFP-GIG-T

Compatible with Alcatel SFP-GIG-TForm Type: SFPData Rate: 1000BASEWavelength: N/ADistance: 100mConnector: RJ45Fiber Type: Copper Cat5Operating Temperature: 0~70 CDOM Supported: No More Info

Basic termination tool kit provides the user with a whole range of basic...

Our Basic termination tool kit provides the user with a whole range of basic tools that are essential for fibre optic termination, splicing & testing. This tool kit is not a termination kit, it is a tookit that includes all the most commonly used tools and consumables. The Kit comprises of the following: 2oz Cleaning solvent. 8 bit screwdriver Fibre stripper Safety Glasses PVC electrical tape Black marke Kevlar Scissors Fusion splice sleeves 60mm  Ruler Jacket Stripper Black work mat Buffer tube stripper Fibre disposal unit Fabric tape... More Info

Xp-Fit Field Termination Kit XPF-P-F

No epoxy, polishing film, or other consumables are required, and there is no need for electrical power, allowing installers to get in and out of installation sites quickly Features:Fast installation to minimize osite labour costs Easy operation Quick assembly in under 2 minutes No adhesive or polishing required Compact tool without electrical powerKit Includes:Inner Cable Jacket Stripper  Thermal Buffer Removal Tool Replacement Blade Set Premium Cleave Tool (Flat) Lint Free Dry Wipes Fiber Optic Cleaning Pen Kevlar Scissors Fibre... More Info

This visual fault locator gives a continuous or pulse of red light.

Refraction of the 650nm red light caused by any breaks and or cracks in the fiber will glow red, thus giving an exact visual location of the fault in the fiber. Features: 2.5mm Adapter built into unit(ST, SC, FC connector) 1.25mm adapter availabe to purchase seperatly (this adapter is shown in picture) Robust and handy design Dust-free cup to protect LD Continuous/Pulse mode options  Emitting LD 650 nm visible red light Low voltage battery warning signal in led More Info

All in one solution for multimode and singlemode test requirements.

Designed with installers in mind, 33-960 Series Micro OTDRs offer excellent performance and ease of use in a truly handheld, lightweight andrugged package. Available as either an 850/1300 nm (multimode) or 850/1300/1310/1550 nm (multimode and single mode) OTDR, they are ideally suited for the installation and troubleshooting of LAN, campus and WAN fiber networks. Both models combine high measurement precision with the user friendliness of one-button operation resulting in accurate characterization of connectors and splices in addition to... More Info

10/100/1000BASE-T SFP RJ45 100m Cu. Fully compatible with Arista SFP-1G-T

Compatible with Arista SFP-1G-TForm Type: SFPData Rate: 100/1000BASEWavelength: N/ADistance: 100mConnector: RJ45Fiber Type: Copper Cat5Operating Temperature: 0~70 CDOM Supported: No More Info

Images are captured digitally and streamed on the monitor of any compatible...

The FTTA Smart Probe allows technicians to inspect the fiber endfaces. Images are captured digitally and streamed on the monitor of any Android Tablet or Smartphone. The FTTX Smart Probe is an ergonomically designed, compact, Wi-Fi probe for smart phones and tablets. Featuring integrated Wi-Fi module and left/right handed thumb or finger operation for greater ease of use and convenience. Incorporating high resolution sensor outputting 960 x 544 pixel resolution images at 16:9 aspect ratio, the Smart Probe can easily view two MT/MPO fibers... More Info

ST Fibre Optic Connectors available in Multimode & Singlemode options

The ST Connector has been the mainstay of optical fibre connectors for many years. It can be found in almost every communications room worldwide, but used mainly in data communications systems. The ST optical fibre connector comprises of a nickel plated brass body and a ceramic ferrule/spring/crimp barrel assembly plus a crimp over sleeve and rubber boot. These connectors are suitable for 900μm and 2-3mm cables. The connector is precision made and manufactured to demanding specifications. Connectors are suitable for use with two part heat... More Info

10GBASE-SR SFP+ 850nm MMF 300m LC. Fully compatible with Alcatel SFP-10G-SR-AL

Compatible with Alcatel SFP-10G-SR-ALForm Type: SFP+Data Rate: 10G 10.3125GbpsWavelength: 850nmDistance: 300mConnector: Dual LCFiber Type: MMFOperating Temperature: 0~70 CDOM Supported: Yes More Info

Pre-Terminated Multi-Core Fibre Cables Made to Your Specification.Made &...

Connectix have developed a cost effective pre-terminated cabling system called OPAL™ (Optical Pre-Assembled Link) which is completely based around standard networking products. The system allows a fibre optic network to be installed in a fraction of the time taken by conventional on-site direct termination or fusion splicing. It requires no special installation skills or equipment, and can therefore be installed by non-specialist personnel, vastly reducing the installation cost.The system consists of standard internal/external tight buffered... More Info

10GBASE-LR SFP+ 1310nm SMF 10km LC. Fully compatible with Alcatel SFP-10G-LR-AL

Compatible with Alcatel SFP-10G-LR-ALForm Type: SFP+Data Rate: 10G 10.3125GbpsWavelength: 1310nmDistance: 10kmConnector: Dual LCFiber Type: SMFOperating Temperature: 0~70 CDOM Supported: Yes More Info

10GBASE-T SFP+ RJ45 30m Cu. Fully compatible with Cisco Systems SFP-10G-TIS

Compatible with Cisco Systems SFP-10G-TIS More Info

Pre-Terminated Multi-Core Fibre Cables Made with either SWA or CST Loose Tube...

Connectix have developed a cost effective pre-terminated cabling system called OPAL™ (Optical Pre-Assembled Link) which is completely based around standard networking products. The system allows a fibre optic network to be installed in a fraction of the time taken by conventional on-site direct termination or fusion splicing. It requires no special installation skills or equipment, and can therefore be installed by non-specialist personnel, vastly reducing the installation cost.The system consists of SWA or CST armoured loose tube fibre... More Info