TP-LINK MC110CS 10/100Mbps Singlemode Media Converter

- Complies with 802.3u 10/100Base-TX, 100Base-FX standards.

- Provides switch configuration of Half-Duplex / Full-Duplex transfer mode for FX port.

- Extends fiber distance up to 20－60km

The MC110CS is a media converter designed to convert 100BASE-FX fiber to 100Base-TX copper media or vice versa. Designed under IEEE 802.3u 10/100Base-TX and 100Base-FX standards, the MC110CS is designed for use with single-mode fiber cable utilizing the SC-Type connector. The MC110CS supports shortwave (SX) laser specification at a full wire speed forwarding rate. It works at 1310nm on both transmitting and receiving data.

Other features of this module include the ability to be used as a stand alone device (no chassis required) or with TP-LINK’s 19’’ system chassis, Auto MDI/MDI-X for TX port, Auto negotiation of duplex mode on TX port, and front panel status LEDs. The MC110CS will transmit at extended fiber optic distances utilizing single-mode fiber up to 20 kilometers.

Cabling technology	UTP 3, 4, 5e, 5
Certification	FCC, CE
Compliance industry standards	IEEE 802.3, IEEE 802.3u, IEEE 802.3x
Connectivity technology	Wired
Dimensions (WxDxH)	94.5 x 73 x 27 mm
Full duplex	Yes
I/O ports	1x 100M SC 1x 100M RJ45
LED indicators	PWR, FDX/Col, Link/Act, SPD
Maximum transfer distance	20000 m
Operating relative humidity (H-H)	10 - 90 %
Operating relative humidity range	10 - 90 %
Operating temperature (T-T)	0 - 40 °C
Operating temperature range (T-T)	0 - 40 °C
Source data-sheet	Icecat.biz
Storage relative humidity (H-H)	5 - 90 %
Storage relative humidity range	5 - 90 %
Storage temperature (T-T)	-40 - 70 °C
Storage temperature range (T-T)	-40 - 70 °C
Wavelength	1310 nm