Fibre Networking (384 products)

The Mini 6S+ comes with all the same excellent specification as the Mini 6s Core Alignment Fusion Splicer but with extra enhancements so that users spends even less time on each termination.  This unit is still the same compact size for convenient transportation and storage & comes with a full range of accessories and spares.Heating Time15sec with 60mm sleeve The Fast Splicing Time7sec with SM fiberUniversial Holder250㎛ / 900㎛ / 2~3Φ / Indoor LED Injection System(No Mirrors)400 cycles (Splicing & Heating)with Two Batteries... More Info

1000BASE-SX SFP 850nm MMF 550m LC. Fully compatible with Axis T8612

Compatible with Axis T8612Form Type: SFPData Rate: 1000BASE 1.25GbpsWavelength: 850nmDistance: 550mConnector: Dual LCFiber Type: MMFOperating Temperature: 0~70 CDOM Supported: Yes More Info

The V0 Fibre Blowing Machine is an extremely compact electrically operated fibre blowing machine optimised for FTTx installation of blown fibre (EPFU) and micro/nano cables, from 0.8 to 6mm into duct from 3 to 16mm. A full digital control system with soft- start, electronic fibre security, memory functions, combined with high speed possibility makes the machine very easy and effective to use. Can be operated directly from its case.Features & BenefitsElectrically operated, battery connected, optional power supply Allows installation in... More Info

1000BASE-LX SFP 1310nm SMF 10km LC. Fully compatible with Axis T8611

Compatible with Axis T8611Form Type: SFPData Rate: 1000BASE 1.25GbpsWavelength: 1310nmDistance: 10kmConnector: Dual LCFiber Type: SMFOperating Temperature: 0~70 CDOM Supported: Yes More Info

Flowlight Jetluber is a device that lubricates the optical fibre cable during fibre blowing. The unit is air-powered and works with a pre-equipped V2 or V3 Jetting machine. Flowlight Jetluber comes with an air valve connector and connection hose for fibre blowing machine. Features & BenefitsSupports cable installation Easy to use Lightweight No electricity needed Quick connection to machine Easy drain Adjustable amount of lube Low air consumption Compact size Protected in hard case No noise More Info

SC Fibre Patch Leads, Available in Multimode Options, OM1, OM2, OM3 & OM4

Our range of Connectix SC to SC fibre patch leads are manufactured in-house, are 100% tested and certified and surpass the high standards required for super fast data applications. These SC - SC FIbre leads are available in multimode OM1 (62.5/125), OM2 (50/125), OM3 (50/125) and OM4 (50/125) specifications. Our fibre cables are manufactured in our advanced fibre termination facility under stringently controlled quality conditions. Our termination facility is one of the largest in the UK providing a high volume and fast turnaround service... More Info

Fibre Patch lead terminated with LC connectors at one end and SC at the...

Our singlemode fibre patch leads are manufactured in-house, are 100% tested and certified and surpass the high standards required for datacomms and CATV applications. The leads are manufactured in our advanced fibre termination facility under stringently controlled quality conditions. Our termination facility is one of the largest in the UK providing a high volume and fast turnaround service for any length singlemode lead. If you require a length that is not shown, email in and we can send over a quote. LC-SC Fibre Lead Details Features:... More Info

Singlemode Fibre Pigtails with SC connectors.

Fibre optic pigtails are typically used to link the fibre optic cable with fibre optic equipment. The connector side of the pigtail is used to link the equipment, while the other side is fusion spliced together with the fibre cable. By splicing together the fibre glasses, it can reach a minimum insertion loss. We are committed to holding extensive stock of many assembly types in all common lengths. This allows us to provide a same day despatch service on most small or medium volume orders. Features:Individually bagged with individual test... More Info

ProSafe 1000Base-T SFP RJ45 GBIC

- 1000Base-T Gigabit Ethernet copper connectivity- RJ45 connector- Fits into the SFP interfaces of GSM7328FS- Drives Gigabit Ethernet up to 100m distances with CAT5E/CAT6 cables More Info

1000BASE-T SFP RJ45 100m Cu. Fully compatible with Brocade/Ruckus E1MG-TX

Compatible with Brocade/Ruckus E1MG-TXForm Type: SFPData Rate: 1000BASEWavelength: N/ADistance: 100mConnector: RJ45Fiber Type: Copper Cat5Operating Temperature: 0~70 CDOM Supported: No More Info

For use with Singlemode/Multimode Power meter

Universal 2.5mm ferrule to 1.25mm adaptorCompatible to SC/ST/FC/LC/MU connectors More Info

10/100/1000BASE-T SFP RJ45 100m Cu. Fully compatible with SonicWall 01-SSC-9791

Compatible with SonicWall 01-SSC-9791Form Type: SFPData Rate: 100/1000BASEWavelength: N/ADistance: 100mConnector: RJ45Fiber Type: Copper Cat5Operating Temperature: 0~70 CDOM Supported: No More Info

10GBASE-SR SFP+ 850nm MMF 300m LC. Fully compatible with Brocade/Ruckus...

Compatible with Brocade/Ruckus 10G-SFPP-SRForm Type: SFP+Data Rate: 10G 10.3125GbpsWavelength: 850nmDistance: 300mConnector: Dual LCFiber Type: MMFOperating Temperature: 0~70 CDOM Supported: Yes More Info

Individual Syringe and Needle for injecting epoxy in fibre terminations

This syringe comes in a complete package with syringe body 0.9mm needle. This syringe and needle is designed to inject epoxy into the connectors. More Info

10GBASE-LR SFP+ 1310nm SMF 10km LC. Fully compatible with Brocade/Ruckus...

Compatible with Brocade/Ruckus 10G-SFPP-LRForm Type: SFP+Data Rate: 10G 10.3125GbpsWavelength: 1310nmDistance: 10kmConnector: Dual LCFiber Type: SMFOperating Temperature: 0~70 CDOM Supported: Yes More Info

10GBASE-T SFP+ RJ45 30m Cu. Fully compatible with Dell Networking SFP-10G-T-DELL

Compatible with Dell Networking SFP-10G-T-DELL More Info